Our Values

If you are not 100% satisfied with your belt, you may return it free of charge within 30 days of purchase for a full refund within 10 days of receiving the return.  Returns must be in new or barely used condition.

If for any reason over the lifetime of the product, a defect develops beyond normal wear and tear (such as unraveling of the bar tack stitch), we will repair your belt free of charge. 

Email jesse@driftbelt.com to initiate a return or warranty request.  Include a picture of the defect on warranty requests.

1. Put the belt on and adjust it to your desired fit.
2. Mark the point where you want the belt to end, allowing a little extra length for comfort.
3. Remove the belt and lay it flat on a stable surface.
4. Using sharp scissors cut straight across at the marked line. Or use the buckle curve as a template.
5. Check the fit and trim a little more if needed. Remember: you can always cut more off, but you can't add it back.
6. Carefully melt the cut edge with a lighter for 1-2 seconds to seal it. Allow it to cool completely before handling.

Click on the YouTube button on our website or here see a "how to" video.

1. Hold the buckle firmly.
2. Pull the webbing through, starting at the buckle end. (The tag end should show on the front, but it will be covered.)
3. Once the webbing is pulled all the way through the buckle, you can wear the belt showing the reverse side. (The notch will face toward your head now, rather than toward your feet.)

Click on the Instagram button on our website to see the pinned video on how to reverse your belt.

Once your order ships, you'll receive a tracking number via email that you can use to monitor your delivery.

We accept all major credit cards, PayPal, and Shop Pay for your convenience.